![](\"https:\/\/www.middletoncoop.com\/wp-content\/uploads\/2017\/07\/christy-review.png\")
<\/p>\n[et_pb_section admin_label=”Section” fullwidth=”off” specialty=”off” transparent_background=”off” background_color=”#143474″ allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”off” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” background_image=”https:\/\/www.middletoncoop.com\/wp-content\/uploads\/2017\/06\/header-bg.jpg”][et_pb_row admin_label=”Row” make_fullwidth=”on” use_custom_width=”off” width_unit=”on” use_custom_gutter=”off” background_color=”rgba(255,255,255,0.5)” allow_player_pause=”off” parallax=”off” parallax_method=”off” make_equal=”off” parallax_1=”off” parallax_method_1=”off”][et_pb_column type=”4_4″][et_pb_post_title admin_label=”Post Title” title=”on” meta=”off” author=”on” date=”on” categories=”on” comments=”on” featured_image=”on” featured_placement=”below” parallax_effect=”on” parallax_method=”on” text_orientation=”center” text_color=”dark” text_background=”off” text_bg_color=”rgba(255,255,255,0.9)” use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [\/et_pb_post_title][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section admin_label=”Section” fullwidth=”off” specialty=”off”][et_pb_row admin_label=”Row”][et_pb_column type=”1_2″][et_pb_text admin_label=”Text” background_layout=”light” text_orientation=”left” use_border_color=”off” border_color=”#ffffff” border_style=”solid”]<\/p>\n
<\/p>\n
PL500
\nAvailable Sizes: 10 fl. oz., 28 fl. oz<\/p>\n
Preparation:<\/p>\n
The temperature of the adhesive, the surfaces and the working area<\/p>\n
must be between 0\u00b0F (-18\u00b0C) and 100\u00b0F (38\u00b0C). For smooth, fast,<\/p>\n
easy application during cold weather, store adhesive at room<\/p>\n
temperature (70\u00b0 \u00b1 5\u00b0F) 24 hours prior to use. Ensure surfaces to<\/p>\n
be bonded are clean, dry, structurally sound and free of dust,<\/p>\n
grease, oil or other contaminants.To increase adhesion, sand<\/p>\n
glossy surfaces to a dull finish. Pre-fit all materials prior to applying<\/p>\n
product. Cut off tip of cartridge at 45\u00b0 angle to desired bead size.<\/p>\n
For exterior applications, the recommended bead size is 3\/8′<\/p>\n
(9.5 mm). Puncture seal inside of nozzle.<\/p>\n
Application:<\/p>\n
Apply a continuous zigzag bead to one surface to be bonded. Apply<\/p>\n
theadhesive at a rate so that the materials can be positioned and<\/p>\n
fastenedwithin 10 minutes. All projects may require support until<\/p>\n
adhesive has cured. It is recommended that all foot traffic stay off<\/p>\n
of paver stones or retainingcaps for at least 24 to 48 hours after<\/p>\n
installation and heavy traffic for approximately 4 to 5 days.<\/p>\n
For Landscape Blocks:
\nWhen installing the cap onto the final course of landscape blocks,<\/p>\n
apply a 6.3 mm (\u00bc’) bead approximately 5 cm (2′) in from the front<\/p>\n
and 5 cm (2′) in from the back of the cap to be installed.<\/p>\n
For Concrete Paving Stones:
\nApply an ‘S’ shaped bead approximately 6.3 mm (\u00bc’) to 9.5 mm<\/p>\n
(3\/8′) in diameter to the back of the stone to be installed. If using<\/p>\n
old concrete, clean with a 20% hydrochloric acid solution.<\/p>\n
Cleanup:<\/p>\n
Clean tools and uncured adhesive residue immediately with<\/p>\n
acetone or mineral spirits in a well-ventilated area to the<\/p>\n
outdoors. Cured adhesivemay be carefully cut away with a sharp-edged tool.<\/p>\n
Recommended For:<\/p>\n
Use on Metal<\/p>\n
Use on Brick, Stone, Slate, & Concrete<\/p>\n
Use on Block wall caps<\/p>\n
Use on Timbers, & Wood<\/p>\n
Not Recommended For:<\/p>\n
Use on plastics<\/p>\n
Use on Applications over hygroscopic salt-treated wood, such as<\/p>\n
Zinc chloride treatments; these substances attract, absorb<\/p>\n
and retain moisture.<\/p>\n
Use on Foam board insulation<\/p>\n
Use in Continuous water submersion<\/p>\n
<\/p>\n
\u200bSB10
\nAvailable Sizes: 10 fl. oz., 28 fl. oz<\/p>\n
Preparation:<\/p>\n
Inspect substrate to be sure it is structurally sound with no spalling,<\/p>\n
cracking or scaling. For ultimate adhesion, surface should be clean,<\/p>\n
free from dirt, oil and grease, excessive water, ice or any other<\/p>\n
material. If cleaning is needed, prepare surface with SureClean<\/p>\n
Deep Penetrating Multi-Use Cleaner. Rinse thoroughly and let dry<\/p>\n
before applying SB-10 Paver Bond. Before application, inspect<\/p>\n
pavers or stone to ensure they are smooth, flat and of the same<\/p>\n
height. Because of SB-10 Paver Bond\u2019s quick set uptime, dry fit<\/p>\n
all pieces to be adhered prior to applying SB-10. Ensure proper<\/p>\n
drainage so that water does not collect or drain into adhered<\/p>\n
areas.<\/p>\n
Application:<\/p>\n
Cut nozzle to desired size and puncture inner seal. Apply a 1\/8\u201d to<\/p>\n
3\/8\u201d bead of SB-10 Paver Bond using a caulking gun. On most<\/p>\n
applications, apply SB-10 Paver Bond in a \u2018S\u2019 shape. Where there<\/p>\n
is a potential for moisture infiltration such as but not limited to<\/p>\n
concrete overlays on an existing step or sidewalk, apply multiple<\/p>\n
lines of SB-10 Paver Bond running in the same direction as the<\/p>\n
flow of drainage. Set in place and tamp gently with a rubber<\/p>\n
mallet to compress the adhesive. Positioning and aligning<\/p>\n
should be done within 10-15 minutes of application.<\/p>\n
Cleanup:<\/p>\n
Use mineral spirits or chlorinated solvents following<\/p>\n
manufacturer\u2019s instructions and precautionary information.
\nRecommended For<\/p>\n
Concrete and clay pavers, steps, coping systems, seat walls,<\/p>\n
retaining walls and caps, columns and caps, outdoor kitchens,<\/p>\n
masonry and brick, natural and manufactured stone, and slate.<\/p>\n
Also bonds to other building materials such as treated lumber,<\/p>\n
aluminum foil back sheathing, gypsum, fiberglass and<\/p>\n
composite decking materials.<\/p>\n
Not Recommended For:<\/p>\n
Do not use below grade, where water is always present or<\/p>\n
where there is direct contact with fire.<\/p>\n
<\/p>\n
\u200bPL Premium
\nAvailable Sizes: 10 fl. oz., 28 fl. oz<\/p>\n
Preparation:<\/p>\n
Use above 40\u00b0F (4\u00b0C). Surfaces must be clean, dry and free of frost,<\/p>\n
grease, dust and other contaminants. Pre-fit all materials and<\/p>\n
protect finished surfaces. If using cartridge format, cut nozzle at a 45\u00b0<\/p>\n
angle to desired bead size and puncture inner seal. Be very careful<\/p>\n
not to allow Loctite\u00ae PL\u00ae Premium to cure on a finished surface.<\/p>\n
Application:<\/p>\n
Apply adhesive to one surface of the material being bonded. Press<\/p>\n
the surfaces firmly together. Materials may be repositioned within<\/p>\n
45 minutes after applying the adhesive. If bonding two non-porous<\/p>\n
surfaces (such as foam, metal and fiberglass), add water in the form<\/p>\n
of a very light or atomized spray from a plant mister bottle to the<\/p>\n
extruded adhesive. The repositioning time will then be reduced to<\/p>\n
less than 30 minutes. Use mechanical support for 24 hours while<\/p>\n
the adhesive cures.<\/p>\n
Cleanup:<\/p>\n
Clean tools and uncured adhesive residue immediately with mineral<\/p>\n
spirits in a well-ventilated area to the outdoors. Remove cured<\/p>\n
adhesive by carefully scraping with a sharp-edged tool.<\/p>\n
Recommended For:<\/p>\n
Bonding most common construction materials such as wood,<\/p>\n
treated wood, hardwood flooring, concrete, stone, marble, slate,<\/p>\n
masonry, brick, foam insulation of all sorts, carpets, metal, lead,<\/p>\n
cement-based products, ceramic, fiberglass, drywall and mirrors
\nNot Recommended For<\/p>\n
Polystyrene, polyethylene or polypropylene<\/p>\n
Plastic Tub Surrounds<\/p>\n
Certain materials such as rubbers and plastics may have<\/p>\n
bonding difficulties; test before use<\/p>\n
Water submersion applications<\/p>\n
[\/et_pb_text][\/et_pb_column][et_pb_column type=”1_2″][et_pb_image admin_label=”Image” src=”https:\/\/www.middletoncoop.com\/wp-content\/uploads\/2017\/08\/placeholder-image-500X500.jpg” show_in_lightbox=”off” url_new_window=”off” use_overlay=”off” animation=”left” sticky=”off” align=”left” force_fullwidth=”off” always_center_on_mobile=”on” use_border_color=”off” border_color=”#ffffff” border_style=”solid”] [\/et_pb_image][\/et_pb_column][\/et_pb_row][\/et_pb_section][et_pb_section admin_label=”Testimonials” global_module=”882″ fullwidth=”off” specialty=”off” transparent_background=”off” allow_player_pause=”off” inner_shadow=”off” parallax=”off” parallax_method=”off” custom_padding=”0px||0px|” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” make_equal=”off” use_custom_gutter=”off” collapsed=”off” background_color=”rgba(249,172,118,0.62)”][et_pb_row global_parent=”882″ admin_label=”Row” make_fullwidth=”off” use_custom_width=”off” width_unit=”on” use_custom_gutter=”on” allow_player_pause=”off” parallax=”off” parallax_method=”off” make_equal=”off” parallax_1=”off” parallax_method_1=”off” gutter_width=”1″ background_color=”rgba(0,0,0,0)”][et_pb_column type=”4_4″][et_pb_slider global_parent=”882″ admin_label=”Testimonial Slider” show_arrows=”on” show_pagination=”on” auto=”on” auto_speed=”8000″ auto_ignore_hover=”off” parallax=”off” parallax_method=”off” remove_inner_shadow=”on” background_position=”default” background_size=”default” top_padding=”30px” bottom_padding=”50px” hide_content_on_mobile=”off” hide_cta_on_mobile=”off” show_image_video_mobile=”off” custom_button=”off” button_letter_spacing=”0″ button_use_icon=”default” button_icon_placement=”right” button_on_hover=”on” button_letter_spacing_hover=”0″ body_line_height=”1.5em” header_text_color=”#000000″ body_text_color=”#000000″] [et_pb_slide background_position=”default” background_size=”default” background_color=”rgba(255,255,255,0)” use_bg_overlay=”off” use_text_overlay=”off” alignment=”center” background_layout=”light” allow_player_pause=”off” text_border_radius=”0″ header_font_select=”default” header_font=”||||” body_font_select=”PT Sans” body_font=”PT Sans||||” custom_button=”off” button_font_select=”default” button_font=”||||” button_use_icon=”default” button_icon_placement=”right” button_on_hover=”on” body_font_size=”20″ body_font_size_tablet=”20″ body_font_size_phone=”20″ body_text_color=”#000000″ admin_title=”Christy” header_text_color=”#000000″]<\/p>\n
<\/p>\n
<\/p>\n
Workers at the feed mill where very friendly and helpful and had us unloaded and on our way asap. Hours say 7:30 am to 5 pm but they stop accepting trucks at 3pm. \u00a0<\/em><\/p>\n Chrissy Brad Blair<\/p>\n [\/et_pb_slide][et_pb_slide background_position=”default” background_size=”default” background_color=”rgba(255,255,255,0)” use_bg_overlay=”off” use_text_overlay=”off” alignment=”center” background_layout=”light” allow_player_pause=”off” text_border_radius=”0″ header_font_select=”default” header_font=”||||” body_font_select=”PT Sans” body_font=”PT Sans||||” custom_button=”off” button_font_select=”default” button_font=”||||” button_use_icon=”default” button_icon_placement=”right” button_on_hover=”on” body_font_size=”20″ body_font_size_tablet=”20″ body_font_size_phone=”20″ body_text_color=”#000000″ admin_title=”Ben” header_text_color=”#000000″]<\/p>\n <\/p>\n![](\"https:\/\/www.middletoncoop.com\/wp-content\/uploads\/2017\/07\/ben-review.png\")
<\/p>\n